%%%%% fctcn01.txt %%%% Created by Laurence D. Finston (LDF) Tue Oct 27 16:50:46 CET 2009 %%%% $Id: fctcn01.txt,v 1.14 2022/12/16 14:05:05 lfinsto1 Exp $ %% * (1) Copyright and License. %%%% This file is part of GNU 3DLDF, a package for three-dimensional drawing. %%%% Copyright (C) 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The Free Software Foundation, Inc. %%%% GNU 3DLDF is free software; you can redistribute it and/or modify %%%% it under the terms of the GNU General Public License as published by %%%% the Free Software Foundation; either version 3 of the License, or %%%% (at your option) any later version. %%%% GNU 3DLDF is distributed in the hope that it will be useful, %%%% but WITHOUT ANY WARRANTY; without even the implied warranty of %%%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the %%%% GNU General Public License for more details. %%%% You should have received a copy of the GNU General Public License %%%% along with GNU 3DLDF; if not, write to the Free Software %%%% Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA %%%% GNU 3DLDF is a GNU package. %%%% It is part of the GNU Project of the %%%% Free Software Foundation %%%% and is published under the GNU General Public License. %%%% See the website http://www.gnu.org %%%% for more information. %%%% GNU 3DLDF is available for downloading from %%%% http://www.gnu.org/software/3dldf/LDF.html. %%%% Please send bug reports to Laurence.Finston@gmx.de. %%%% The mailing list help-3dldf@gnu.org is available for people to %%%% ask other users for help. %%%% The mailing list info-3dldf@gnu.org is for the maintainer of %%%% GNU 3DLDF to send announcements to users. %%%% To subscribe to these mailing lists, send an %%%% email with ``subscribe '' as the subject. %%%% The author can be contacted at: %%%% Laurence D. Finston %%%% c/o Free Software Foundation, Inc. %%%% 51 Franklin St, Fifth Floor %%%% Boston, MA 02110-1301 %%%% USA %%%% Laurence.Finston@gmx.de %% * (1) \special{papersize=210mm, 297mm} %% DIN A4 Portrait \vsize=297mm \hsize=210mm \input epsf \nopagenumbers \pageno=1 \parindent=0pt \def\epsfsize#1#2{#1} \font\small=cmr8 \font\smalltt=cmtt8 \font\large=cmr12 \font\largebx=cmbx12 %% *** (3) \headline={\hfil} \advance\voffset by -1in \advance\voffset by 1cm \advance\hoffset by -1in \advance\hoffset by 1cm %% *** (3) Title page \pageno=1 \begingroup \hsize=19cm %\pageno=0 \vskip1cm \centerline{Facetted Cone Model 1} \vskip\baselineskip \centerline{Laurence D. Finston} \vskip\baselineskip \centerline{Created: October 27, 2009} \vskip\baselineskip \centerline{\hskip 1cm Last updated: November 2, 2009} \vskip0cm % {\small \hsize=.75\hsize %\hskip1cm \vbox{\vskip2\baselineskip This document is part of GNU 3DLDF, a package for three-dimensional drawing. \vskip\baselineskip !Copyright (C) 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The Free Software Foundation, Inc. \vskip\baselineskip GNU 3DLDF is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. \vskip\baselineskip GNU 3DLDF is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. \vskip\baselineskip You should have received a copy of the GNU General Public License along with GNU 3DLDF; if not, write to the Free Software Foundation, Inc.,\hfil\break 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA \vskip\baselineskip See the GNU Free Documentation License for the copying conditions that apply to this document. \vskip\baselineskip You should have received a copy of the GNU Free Documentation License along with GNU 3DLDF; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA \vskip\baselineskip The mailing list {\smalltt info-3dldf@gnu.org} is for sending announcements to users. To subscribe to this mailing list, send an email with ``subscribe $\langle$email-address$\rangle$'' as the subject. \vskip\baselineskip The author can be contacted at:\vskip\baselineskip Laurence D. Finston\hfil\break c/o Free Software Foundation, Inc.\hfil\break 51 Franklin St, Fifth Floor \hfil\break Boston, MA 02110-1301 \hfil\break USA \vskip.5\baselineskip Email: {\smalltt Laurence.Finston@gmx.de}\hfil\break GNU 3DLDF website: {\smalltt http://www.gnu.org/software/3dldf/LDF.html}}} \vskip1cm \par \endgroup \vfil\eject %% *** (3) \begingroup \hsize=19cm %\pageno=0 \headline={\hskip 2cm Facetted Cone Model 1\quad % !Copyright {\copyright} 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The Free Software Foundation, Inc.\hfil % \folio\hfil Author: Laurence D. Finston\hfil} \centerline{{\largebx Instructions}} \vskip 1.5\baselineskip {\bf PLEASE NOTE!} The author has tried to ensure that the following plans are correct, but as of October 27, 2009, he has not tested them yet himself. As mentioned above, this material is distributed {\bf without a warranty}. I recommend that users check it themselves before investing a lot of time and effort into cutting out the paper model. Any corrections will be gratefully received by the author. Contact information can be found on the title page. To use these plans, tape or otherwise attach them to a sheet of heavy paper; I recommend watercolor paper. Bristol board or cardboard may be used for the circular base, but probably will not work well for the facetted cone. %% LDF 2009.11.02. {\bf PLEASE NOTE!} Tabs that are cut out together with a section of the model (i.e., in one piece) are not suitable for use with thick Bristol board! In this case, the thickness of the cardboard is significant and the parts won't match up properly. Instead, double tabs should be cut out and attached to each of the pieces that are to be connected. I plan to add plans with double tabs, but have not done so yet (as of 2009.11.02). First, prick out the holes for the stitches and then use a cutting knife to cut out the {\it outer\/} lines of the plan. {\bf Please note}: The {\it inner\/} lines are only for reference and should not be scored! The knife must be sharp as watercolor paper (or other heavy papers) will dull the blade quickly. I have been using knives with disposable blades. I've been meaning to try sharpening them but haven't done so yet. I therefore can't say whether this will work. It seems a shame to waste so many blades, which is why I have a jar full of them. They must be good for something. It will be necessary to retape as bits of the plan are cut out. Make sure that the plan is taped down smoothly or you will introduce inaccuracies. {\it Do not untape it or let it slip until you are done!\/} You will never get it back where it's supposed to go. Use removable tape. Ordinary masking tape will damage the paper when it is removed. Be aware that ``removable tape'' isn't completely reliable, especially if left too long on the drawing. Sometimes it's possible to reuse pieces of it, which avoids wasting large amounts of it. \par \vfil\eject \endgroup \headline={\hskip 2cm Facetted Cone Model 1\quad % !Copyright {\copyright} 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 The Free Software Foundation, Inc.\hfil % \folio\hfil Author: Laurence D. Finston\hfil} %% *** (3) Page 3 \advance\hoffset by -1in \advance\hoffset by 1.5cm \advance\voffset by .5cm %% *** (3) Headline \pageno=3 %% *** (3) Page 2 \vbox to \vsize{% \vskip1cm \line{\hskip 3cm\epsffile{fctcn01.1}\hss} \vskip1cm \line{\hskip 3cm\epsffile{fctcn01.2}\hss} \vskip.75cm \line{\hskip 2cm{GNU 3DLDF Website: \smalltt http://www.gnu.org/software/3dldf/LDF.html}\hss} \vss} %% *** (3) End here \bye %% * (1) Local variables for Emacs. %% Local Variables: %% mode:TeX %% eval:(local-set-key [C-kp-add] 'vc-diff) %% eval:(local-set-key "\"" 'self-insert-command) %% eval:(outline-minor-mode t) %% eval:(read-abbrev-file abbrev-file-name) %% abbrev-mode:t %% outline-regexp:"%% [*\f]+" %% End: \bye %% * (1) Local variables for Emacs. %% Local Variables: %% mode:TeX %% eval:(local-set-key [C-kp-add] 'vc-diff) %% eval:(local-set-key "\"" 'self-insert-command) %% eval:(outline-minor-mode t) %% eval:(read-abbrev-file abbrev-file-name) %% abbrev-mode:t %% outline-regexp:"%% [*\f]+" %% End: