Next: Conditional Init Constructs, Up: Readline Init File [Contents][Index]
There are only a few basic constructs allowed in the Readline init file. Blank lines are ignored. Lines beginning with a ‘#’ are comments. Lines beginning with a ‘$’ indicate conditional constructs (see Conditional Init Constructs). Other lines denote variable settings and key bindings.
You can modify the run-time behavior of Readline by
altering the values of variables in Readline
using the set command within the init file.
The syntax is simple:
set variable value
Here, for example, is how to
change from the default Emacs-like key binding to use
vi line editing commands:
set editing-mode vi
Variable names and values, where appropriate, are recognized without regard to case. Unrecognized variable names are ignored.
Boolean variables (those that can be set to on or off) are set to on if the value is null or empty, on (case-insensitive), or 1. Any other value results in the variable being set to off.
The bind -V command lists the current Readline variable names
and values. See Bash Builtin Commands.
A great deal of run-time behavior is changeable with the following variables.
active-region-start-color ¶A string variable that controls the text color and background when displaying
the text in the active region (see the description of
enable-active-region below).
This string must not take up any physical character positions on the display,
so it should consist only of terminal escape sequences.
It is output to the terminal before displaying the text in the active region.
This variable is reset to the default value whenever the terminal type changes.
The default value is the string that puts the terminal in standout mode,
as obtained from the terminal’s terminfo description.
A sample value might be ‘\e[01;33m’.
active-region-end-color ¶A string variable that "undoes" the effects of active-region-start-color
and restores "normal" terminal display appearance after displaying text
in the active region.
This string must not take up any physical character positions on the display,
so it should consist only of terminal escape sequences.
It is output to the terminal after displaying the text in the active region.
This variable is reset to the default value whenever the terminal type changes.
The default value is the string that restores the terminal from standout mode,
as obtained from the terminal’s terminfo description.
A sample value might be ‘\e[0m’.
bell-style ¶Controls what happens when Readline wants to ring the terminal bell. If set to ‘none’, Readline never rings the bell. If set to ‘visible’, Readline uses a visible bell if one is available. If set to ‘audible’ (the default), Readline attempts to ring the terminal’s bell.
bind-tty-special-chars ¶If set to ‘on’ (the default), Readline attempts to bind the control characters treated specially by the kernel’s terminal driver to their Readline equivalents.
blink-matching-paren ¶If set to ‘on’, Readline attempts to briefly move the cursor to an opening parenthesis when a closing parenthesis is inserted. The default is ‘off’.
colored-completion-prefix ¶If set to ‘on’, when listing completions, Readline displays the
common prefix of the set of possible completions using a different color.
The color definitions are taken from the value of the LS_COLORS
environment variable.
If there is a color definition in LS_COLORS for the custom suffix
‘readline-colored-completion-prefix’, Readline uses this color for
the common prefix instead of its default.
The default is ‘off’.
colored-stats ¶If set to ‘on’, Readline displays possible completions using different
colors to indicate their file type.
The color definitions are taken from the value of the LS_COLORS
environment variable.
The default is ‘off’.
comment-begin ¶The string to insert at the beginning of the line when the
insert-comment command is executed. The default value
is "#".
completion-display-width ¶The number of screen columns used to display possible matches when performing completion. The value is ignored if it is less than 0 or greater than the terminal screen width. A value of 0 will cause matches to be displayed one per line. The default value is -1.
completion-ignore-case ¶If set to ‘on’, Readline performs filename matching and completion in a case-insensitive fashion. The default value is ‘off’.
completion-map-case ¶If set to ‘on’, and completion-ignore-case is enabled, Readline treats hyphens (‘-’) and underscores (‘_’) as equivalent when performing case-insensitive filename matching and completion. The default value is ‘off’.
completion-prefix-display-length ¶The length in characters of the common prefix of a list of possible completions that is displayed without modification. When set to a value greater than zero, common prefixes longer than this value are replaced with an ellipsis when displaying possible completions.
completion-query-items ¶The number of possible completions that determines when the user is
asked whether the list of possibilities should be displayed.
If the number of possible completions is greater than or equal to this value,
Readline will ask whether or not the user wishes to view them;
otherwise, they are simply listed.
This variable must be set to an integer value greater than or equal to zero.
A zero value means Readline should never ask; negative values are
treated as zero.
The default limit is 100.
convert-meta ¶If set to ‘on’, Readline will convert characters with the
eighth bit set to an ASCII key sequence by stripping the eighth
bit and prefixing an ESC character, converting them to a
meta-prefixed key sequence.
The default value is ‘on’, but
will be set to ‘off’ if the locale is one that contains
eight-bit characters.
This variable is dependent on the LC_CTYPE locale category, and
may change if the locale is changed.
disable-completion ¶If set to ‘On’, Readline will inhibit word completion.
Completion characters will be inserted into the line as if they had
been mapped to self-insert. The default is ‘off’.
echo-control-characters ¶When set to ‘on’, on operating systems that indicate they support it, Readline echoes a character corresponding to a signal generated from the keyboard. The default is ‘on’.
editing-mode ¶The editing-mode variable controls which default set of
key bindings is used. By default, Readline starts up in Emacs editing
mode, where the keystrokes are most similar to Emacs. This variable can be
set to either ‘emacs’ or ‘vi’.
emacs-mode-string ¶If the show-mode-in-prompt variable is enabled, this string is displayed immediately before the last line of the primary prompt when emacs editing mode is active. The value is expanded like a key binding, so the standard set of meta- and control prefixes and backslash escape sequences is available. Use the ‘\1’ and ‘\2’ escapes to begin and end sequences of non-printing characters, which can be used to embed a terminal control sequence into the mode string. The default is ‘@’.
enable-active-region ¶The point is the current cursor position, and mark refers
to a saved cursor position (see Commands For Moving).
The text between the point and mark is referred to as the region.
When this variable is set to ‘On’, Readline allows certain commands
to designate the region as active.
When the region is active, Readline highlights the text in the region using
the value of the active-region-start-color, which defaults to the
string that enables
the terminal’s standout mode.
The active region shows the text inserted by bracketed-paste and any
matching text found by incremental and non-incremental history searches.
The default is ‘On’.
enable-bracketed-paste ¶When set to ‘On’, Readline configures the terminal to insert each paste into the editing buffer as a single string of characters, instead of treating each character as if it had been read from the keyboard. This is called putting the terminal into bracketed paste mode; it prevents Readline from executing any editing commands bound to key sequences appearing in the pasted text. The default is ‘On’.
enable-keypad ¶When set to ‘on’, Readline will try to enable the application keypad when it is called. Some systems need this to enable the arrow keys. The default is ‘off’.
enable-meta-keyWhen set to ‘on’, Readline will try to enable any meta modifier key the terminal claims to support when it is called. On many terminals, the meta key is used to send eight-bit characters. The default is ‘on’.
expand-tilde ¶If set to ‘on’, tilde expansion is performed when Readline attempts word completion. The default is ‘off’.
history-preserve-point ¶If set to ‘on’, the history code attempts to place the point (the
current cursor position) at the
same location on each history line retrieved with previous-history
or next-history. The default is ‘off’.
history-size ¶Set the maximum number of history entries saved in the history list. If set to zero, any existing history entries are deleted and no new entries are saved. If set to a value less than zero, the number of history entries is not limited. By default, the number of history entries is not limited. If an attempt is made to set history-size to a non-numeric value, the maximum number of history entries will be set to 500.
horizontal-scroll-mode ¶This variable can be set to either ‘on’ or ‘off’. Setting it to ‘on’ means that the text of the lines being edited will scroll horizontally on a single screen line when they are longer than the width of the screen, instead of wrapping onto a new screen line. This variable is automatically set to ‘on’ for terminals of height 1. By default, this variable is set to ‘off’.
input-meta ¶If set to ‘on’, Readline will enable eight-bit input (it
will not clear the eighth bit in the characters it reads),
regardless of what the terminal claims it can support. The
default value is ‘off’, but Readline will set it to ‘on’ if the
locale contains eight-bit characters.
The name meta-flag is a synonym for this variable.
This variable is dependent on the LC_CTYPE locale category, and
may change if the locale is changed.
isearch-terminators ¶The string of characters that should terminate an incremental search without subsequently executing the character as a command (see Searching for Commands in the History). If this variable has not been given a value, the characters ESC and C-J will terminate an incremental search.
keymap ¶Sets Readline’s idea of the current keymap for key binding commands.
Built-in keymap names are
emacs,
emacs-standard,
emacs-meta,
emacs-ctlx,
vi,
vi-move,
vi-command, and
vi-insert.
vi is equivalent to vi-command (vi-move is also a
synonym); emacs is equivalent to emacs-standard.
Applications may add additional names.
The default value is emacs.
The value of the editing-mode variable also affects the
default keymap.
keyseq-timeoutSpecifies the duration Readline will wait for a character when reading an
ambiguous key sequence (one that can form a complete key sequence using
the input read so far, or can take additional input to complete a longer
key sequence).
If no input is received within the timeout, Readline will use the shorter
but complete key sequence.
Readline uses this value to determine whether or not input is
available on the current input source (rl_instream by default).
The value is specified in milliseconds, so a value of 1000 means that
Readline will wait one second for additional input.
If this variable is set to a value less than or equal to zero, or to a
non-numeric value, Readline will wait until another key is pressed to
decide which key sequence to complete.
The default value is 500.
mark-directoriesIf set to ‘on’, completed directory names have a slash appended. The default is ‘on’.
mark-modified-lines ¶This variable, when set to ‘on’, causes Readline to display an asterisk (‘*’) at the start of history lines which have been modified. This variable is ‘off’ by default.
mark-symlinked-directories ¶If set to ‘on’, completed names which are symbolic links
to directories have a slash appended (subject to the value of
mark-directories).
The default is ‘off’.
This variable, when set to ‘on’, causes Readline to match files whose names begin with a ‘.’ (hidden files) when performing filename completion. If set to ‘off’, the leading ‘.’ must be supplied by the user in the filename to be completed. This variable is ‘on’ by default.
If set to ‘on’, menu completion displays the common prefix of the list of possible completions (which may be empty) before cycling through the list. The default is ‘off’.
output-meta ¶If set to ‘on’, Readline will display characters with the
eighth bit set directly rather than as a meta-prefixed escape
sequence.
The default is ‘off’, but Readline will set it to ‘on’ if the
locale contains eight-bit characters.
This variable is dependent on the LC_CTYPE locale category, and
may change if the locale is changed.
page-completions ¶If set to ‘on’, Readline uses an internal more-like pager
to display a screenful of possible completions at a time.
This variable is ‘on’ by default.
print-completions-horizontallyIf set to ‘on’, Readline will display completions with matches sorted horizontally in alphabetical order, rather than down the screen. The default is ‘off’.
revert-all-at-newline ¶If set to ‘on’, Readline will undo all changes to history lines
before returning when accept-line is executed. By default,
history lines may be modified and retain individual undo lists across
calls to readline(). The default is ‘off’.
show-all-if-ambiguous ¶This alters the default behavior of the completion functions. If set to ‘on’, words which have more than one possible completion cause the matches to be listed immediately instead of ringing the bell. The default value is ‘off’.
show-all-if-unmodified ¶This alters the default behavior of the completion functions in a fashion similar to show-all-if-ambiguous. If set to ‘on’, words which have more than one possible completion without any possible partial completion (the possible completions don’t share a common prefix) cause the matches to be listed immediately instead of ringing the bell. The default value is ‘off’.
show-mode-in-prompt ¶If set to ‘on’, add a string to the beginning of the prompt indicating the editing mode: emacs, vi command, or vi insertion. The mode strings are user-settable (e.g., emacs-mode-string). The default value is ‘off’.
skip-completed-text ¶If set to ‘on’, this alters the default completion behavior when inserting a single match into the line. It’s only active when performing completion in the middle of a word. If enabled, Readline does not insert characters from the completion that match characters after point in the word being completed, so portions of the word following the cursor are not duplicated. For instance, if this is enabled, attempting completion when the cursor is after the ‘e’ in ‘Makefile’ will result in ‘Makefile’ rather than ‘Makefilefile’, assuming there is a single possible completion. The default value is ‘off’.
vi-cmd-mode-string ¶If the show-mode-in-prompt variable is enabled, this string is displayed immediately before the last line of the primary prompt when vi editing mode is active and in command mode. The value is expanded like a key binding, so the standard set of meta- and control prefixes and backslash escape sequences is available. Use the ‘\1’ and ‘\2’ escapes to begin and end sequences of non-printing characters, which can be used to embed a terminal control sequence into the mode string. The default is ‘(cmd)’.
vi-ins-mode-string ¶If the show-mode-in-prompt variable is enabled, this string is displayed immediately before the last line of the primary prompt when vi editing mode is active and in insertion mode. The value is expanded like a key binding, so the standard set of meta- and control prefixes and backslash escape sequences is available. Use the ‘\1’ and ‘\2’ escapes to begin and end sequences of non-printing characters, which can be used to embed a terminal control sequence into the mode string. The default is ‘(ins)’.
visible-stats ¶If set to ‘on’, a character denoting a file’s type is appended to the filename when listing possible completions. The default is ‘off’.
The syntax for controlling key bindings in the init file is simple. First you need to find the name of the command that you want to change. The following sections contain tables of the command name, the default keybinding, if any, and a short description of what the command does.
Once you know the name of the command, simply place on a line in the init file the name of the key you wish to bind the command to, a colon, and then the name of the command. There can be no space between the key name and the colon – that will be interpreted as part of the key name. The name of the key can be expressed in different ways, depending on what you find most comfortable.
In addition to command names, Readline allows keys to be bound to a string that is inserted when the key is pressed (a macro).
The bind -p command displays Readline function names and
bindings in a format that can be put directly into an initialization file.
See Bash Builtin Commands.
keyname is the name of a key spelled out in English. For example:
Control-u: universal-argument Meta-Rubout: backward-kill-word Control-o: "> output"
In the example above, C-u is bound to the function
universal-argument,
M-DEL is bound to the function backward-kill-word, and
C-o is bound to run the macro
expressed on the right hand side (that is, to insert the text
‘> output’ into the line).
A number of symbolic character names are recognized while processing this key binding syntax: DEL, ESC, ESCAPE, LFD, NEWLINE, RET, RETURN, RUBOUT, SPACE, SPC, and TAB.
keyseq differs from keyname above in that strings denoting an entire key sequence can be specified, by placing the key sequence in double quotes. Some GNU Emacs style key escapes can be used, as in the following example, but the special character names are not recognized.
"\C-u": universal-argument "\C-x\C-r": re-read-init-file "\e[11~": "Function Key 1"
In the above example, C-u is again bound to the function
universal-argument (just as it was in the first example),
‘C-x C-r’ is bound to the function re-read-init-file,
and ‘ESC [ 1 1 ~’ is bound to insert
the text ‘Function Key 1’.
The following GNU Emacs style escape sequences are available when specifying key sequences:
\C-control prefix
\M-meta prefix
\ean escape character
\\backslash
\"", a double quotation mark
\'', a single quote or apostrophe
In addition to the GNU Emacs style escape sequences, a second set of backslash escapes is available:
\aalert (bell)
\bbackspace
\ddelete
\fform feed
\nnewline
\rcarriage return
\thorizontal tab
\vvertical tab
\nnnthe eight-bit character whose value is the octal value nnn (one to three digits)
\xHHthe eight-bit character whose value is the hexadecimal value HH (one or two hex digits)
When entering the text of a macro, single or double quotes must be used to indicate a macro definition. Unquoted text is assumed to be a function name. In the macro body, the backslash escapes described above are expanded. Backslash will quote any other character in the macro text, including ‘"’ and ‘'’. For example, the following binding will make ‘C-x \’ insert a single ‘\’ into the line:
"\C-x\\": "\\"
Next: Conditional Init Constructs, Up: Readline Init File [Contents][Index]